Our Certificates

Carbon Fiber Chopped Fibers

 

It is one of the forms of Carbon Fiber Yarns cut into specific sizes such as 3 mm, 6 mm, 12 mm, etc.

 

It increases abrasion, fracture and breakage strength, durability, robustness, electrical conductivity, buckling strength, and fatigue resistance. It is recommended to store it in dry environments not exposed to sunlight. 

Chopped carbon fibers are used for the mechanical reinforcement of thermoset and thermoplastic parts due to their high mechanical strength and thermal resistance. In addition, because of their electrical conductivity, they are used as additives in industrial floors and parts where antistatic properties are desired, and in products such as brake pads due to their high wear resistance.   

Chopped carbon fiber is a material obtained by breaking long-fiber carbon fibers into short pieces and is generally used for reinforcement purposes. Thanks to its light weight, high strength, and conductivity, it is preferred in many industries. It is especially used to reinforce plastic- and resin-based composite materials.

In the automotive industry, it is ideal for increasing part strength; in aviation, for lightening structural components; and in electronic products, for improving thermal conductivity. It is also used in 3D printing filaments, brake pads, sports equipment, and construction reinforcements. Its cost-effectiveness and formability make chopped carbon fiber a practical engineering solution.

Chopped carbon fiber is typically produced in short fiber lengths ranging from 3 mm to 12 mm. However, depending on the area of use and the type of application, there are also much shorter versions such as 0.5 mm or longer ones up to 25 mm. Fiber length directly affects the final properties of the composite material. While short fibers are preferred in molding processes that require high flowability, longer fibers are used to provide greater mechanical strength. In particular, in injection molding, 3D printing, thermoplastic reinforcements, and automotive parts production, fiber sizes are determined according to the application. Selecting the appropriate fiber length is critically important for product performance.

WhatsAppSupport Line