Product Name: KBT- Basalt Geogrid 100 kN 40 x40 mm
Product Weight: 460 g/m2
Cell Spacing: 40 mm x 40 mm
Elastic Modulus of Fibers: 85 ÷ 98 GPa
Tensile Strength: 3200 ÷ 4840 MPa
Ultimate Strain: 1.9 ÷ 3.2
• Thanks to its specially developed coating, it adheres very well to the surface.
• It has high mechanical strength and elasticity modulus.
• It is resistant to chemically aggressive environments and especially to highly alkaline environments.
• It minimizes the formation and propagation of cracks.
• It is easy to apply.
• It has a low thermal conductivity coefficient.
• It is non-combustible.
• It is suitable for the historical architectural fabric.
• It is environmentally friendly.
• It can be used as a natural material in green building applications.
Surface Preparation: Clean the surface of the structure from materials such as plaster, paint, dirt, etc.
Correction and Repair: Apply repair mortar (5 mm–15 mm) according to the condition of the surface.
Mesh Application: After the repair mortar is applied, apply the basalt mesh.
Anchoring: One day after the application, drill holes for L anchors and place the anchor rods using epoxy adhesive.
Final Coat: Finish the process with a final coat of repair mortar (5 mm–15 mm) in a way that covers the anchor rods.
Basalt mesh fabrics are special products manufactured by weaving basalt fiber into mesh form on special weaving machines and then coating it with alkali.
They are products developed for the structural strengthening of load-bearing elements in historical buildings, in structures to be restored, or on roads to prevent cracks and provide additional strength to the structure. They have higher tensile strength compared to glass fiber and steel.
Thanks to their resistance to corrosion, alkali, and oxidation, these high-performance basalt mesh fabrics can be easily used in cement, mortar, and asphalt applications.